LUBRATEC® closures

Closures to seal off large vehicle entrances, from LUBRATEC® wind protection range.

Apart from providing wind protection, closure systems serve to seal off vehicle entrances that are larger than standard doors. In the closed position, they are tensioned by ratchets to create an effective barrier against wind and weather. In terms of opening action, a distinction is drawn between rolling and folding, and between upward- and side-opening systems.

Models

The LUBRATEC® closure product group features four different models to meet the needs of the particular situation:

  • LUBRATEC® roller blind closures
  • LUBRATEC® roll-up walls
  • LUBRATEC® folding closures
  • LUBRATEC® sliding closures

Why choose LUBRATEC® closures?

The use of robust, durable materials – e.g. polyester (PES) and polyethylene (PE) – ensures that all LUBRATEC® closure models offer extra-high weather and UV resistance. A choice of different widths, heights, drive options and, in some cases, colors is available. All systems are made to measure in line with the customer’s specifications.

LUBRATEC® roller blind closure
h = 5 m
16 ft 5 in
w = 50 m
164 ft 1 in		 h = 5 m
16 ft 5 in
w = 35 m
114 ft 10 in		 h = 5 m
16 ft 5 in
w = 50 m
164 ft 1 in		 h = 5 m
16 ft 5 in
w = 50 m
164 ft 1 in		 h = 4 m
13 ft 2 in
w = 10 m
32 ft 10 in

The roller blind closure is used to close off vehicle entrances that are larger than standard closures. The hanging is either fully wound up at the top (open position) or unrolled and tensioned at the bottom by ratchets (closed position). Extra-long systems can be operated by means of a fixed drive motor with long telescopic articulated coupling or a travelling drive motor. Shorter units can be operated by crank handle with integral gearbox.

 
LUBRATEC® roller blind closure with tube motor

h = 5 m
16 ft 5 in
w = 15 m
49 ft 3 in
LUBRATEC® roller blind closure with tube motor for inclosure use

h = 5 m
16 ft 5 in
w = 15 m
49 ft 3 in

Die Rollofront mit Rohrmotor ist zwar in der Länge begrenzt, verfügt dafür aber über seitliche Führungsschienen und Dichtlippen. Sie dient zum Verschließen von Durchfahrten, die größer als Tore sind. Der Behang ist entweder ganz oben aufgerollt oder verschlossen und unten mit Ratschen verspannt. Ausführungen für den Innenbereich (z.B. zwischen Warteraum und Melkstand) benötigen keine Ratschen.
LUBRATEC® roll-up wall
h = 3,20 m
10 ft 6 in
w = 30 m
98 ft 5 in		 h = 3,20 m
10 ft 6 in
w = 20 m
65 ft 7 in
The roll-up wall is an easily retractable curtain, fixed to the building at the top with a rail and wound onto the roller suspended below. The roll-up wall can be either fully open or fully closed. When closed (in the fully unrolled position), the roller is tensioned at the bottom by ratchets and claw hooks. Operation is by either a tube motor or geared crank handle.

 
LUBRATEC® folding closure
h = 5 m
16 ft 5 in
w = 10 m
32 ft 10 in		 h = 5 m
16 ft 5 in
w = 20 m
65 ft 7 in
The folding closure is used to close off vehicle entrances that are larger than standard doors. It opens from the bottom upwards, with the hanging gathering at the top. Horizontal belts, stitched to the hanging and carried by rollers in lateral aluminium guide rails, ensure reliable opening and closing even in windy conditions. The space requirement for the folded hanging must be factored in when determining the headroom. At the sides, space is only needed for the rails. When closed, the folding closure is secured at the bottom by ratchets. The closure is operated by means of a drive motor or hand winch with pull chain.

 
LUBRATEC® sliding closure
h = 4 m
13 ft 2 in
w = 20 m
65 ft 7 in
The sliding closure is particularly suitable for low headrooms, where no space is available at the top for the retracted hanging. The entire closure is opened and closed by means of a pull strap that runs along the top. Two large ratchets allow the hanging to be tensioned at the sides. The sliding closure is secured at ground level using easily attachable belt buckles.